We put at your disposal our engines laboratory : - Power and torque measure - Exhaust testing - Airbox testing - Slip clutch and efficiency measure - Optimization carburetion setting Equipment used : - Bench braked Borghi & Saveri engines up to 10hp - Bench between centers precision metrology for crankshafts - Metrology digital Mitutoyo ( alésomètres , micrometers etc .. ) - Conventional machining![]()
Technical characteristics of the dyno bench : - Bench Borghi & Saveri 10hp braked eddy current ( Dyno ) water cooled - Torque Sensor Interface precision repeatability 0.02 % , Temp sensitivity 0.0008 % / ° F - Software acquisition and measurement / analysis real time The measurements are performed with control of the engine temperature. The braked bench allows for tests of different systems and accurately simulate vehicle acceleration considering the clutch slip . Power curves / torque are directly usable on the second screen and superimposed. Gains for each configuration engine choice exhausts, carburettors or air box
directly visible !
Accurate measurement report is provided after each test:
below a report for 290 Rc Zenoah stock
tested with 2 exhausts (stock and Samba5) , the gains are clear , continuous line power , torque dootted
Find our services in the section of the shop Engine testing